StarrSpace 3500 Partition Wall System

General

The Pre-Engineered office system shall be SS3500 as manufactured by Starrco Company, Incorporated, located in St. Louis, Missouri. Starrco has been a manufacturer of world-class pre-engineered office systems since 1965. To create a top-notch work environment, consider using Starrco’s modular office partitions. For additional information, see the specifications provided in the space below.

Wall Panels

 

SP Panels Wall panels shall be a sandwich-type construction with 1/8" vinyl covered hardboard laminated to both sides of a 2 3/4" thick noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3". Insulation value R-13.
DL Panels Wall panels shall be a sandwich-type construction with ½" vinyl covered gypsum board laminated to both sides of 2" thick noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3". Panel is Class A noncombustible when tested in accordance to ASTM-E-84. Insulation value R-11.
SC Panels Wall panels shall be a sandwich-type construction with 1/8" vinyl covered hardboard laminated to 5/8" high density particle board on both sides of noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3". Insulation value R­10. 

 

Optional Finishes

Optional wall coverings include painted aluminum, cork, Melamine, PVC, painted steel, fiberglass reinforced plastic (FRP), etc.

Framework

 

Wire Studs Studs shall be extruded from 6063 aluminum alloy with T6 temper. Wire studs allow for electrical, data processing, and communication lines to be run vertically in a raceway accessible from a removable cover plate. Stud is designed in two pieces that allow both sides to be wired with electrical devices and communication receptacles. Design also gives system the capability of removing a panel without disturbing the adjacent panels.
Floor and Ceiling Track Track shall be extruded from 6063 aluminum alloy with T6 temper. Track shall be precut and mitered at the factory to eliminate the need for field cutting. Overall thickness of system at floor and ceiling crack is 3 7/16".
Finish The aluminum extrusions are available in a "Khaki" Baked-on Painted Finish. Special color painted finishes are available.
Height The system is available in the following standard heights: 8', 9', 10', and 12. Special Height available. Systems over 8' tall may have spliced panels depending upon the panel construction or finish.